SUP K-Pump K20

The SUP K-Pump K20 is generally special-order; we rarely stock these so please call before going to our shopping cart. This is a compact two stage pump the same size as K-Pump's K-100 model, but with a smaller diameter inner cylinder. It is easy to achieve high p.s.i. levels allegedly up to 25 p.s.i., though we think this is a bit optimistic. The high volume/low pressure outer cylinder mode "shapes up" your board quickly. After you get your SUP up to about 4 or 5 p.s.i. you then twist the handle to switch to the high pressure mode. One big caveat on this product is that the plunger shaft for the inner cylinder is very thin pvc, and if you accidentally torqued it off-angle it could definitely snap.

Make sure that you check your p.s.i. readings frequently because when the pump is in high pressure mode it strokes with minimal resistance. It would not be hard to over-inflate & damage your SUP. If you don't have a gauge... get one. K-Pump makes the Kwik Check gauge that works with most of the valves found on current SUPs and is accurate and easy to use.

SUP K-Pump K20