AIRE Super Puma 13' Self Bailing River Raft

If you are looking for a Superpuma to use as a paddle raft, we do have a teal color one with two thwarts on sale. The retail price for this one (the thwarts run $379 each retail) would be $5,167; the sale price including UPS to the lower 48 states is $4,649

The AIRE Super Puma raft is shown priced with NO THWARTS and this is the lowest priced configuration. Each thwart is about an additional $379. An additional price break of 5% is available for payments made via cashier's check. Call us for details. Made in USA.

The AIRE Super Puma 13' self bailing river raft is a fast, narrow (5'8" wide) raft ideal for paddle crews, or as an angler's driftboat, albeit without the need of a trailer that a normal dory mandates. As a paddle boat the Super Puma is most at home on tight, steep, low volume streams. The tubes taper at the ends of the hull from 18.5" to 13.5", making for a small surface area to punch waves with ease. It's also a bit hard on the tush to paddle captain from the very stern with the small pointy end shape. Super Puma's are stretched out 18" in length over the regular Puma, are 2" wider (5'8" instead of 5'6") and comfortably hold one extra person (five paddlers instead of four). There are three main tube chambers on the Super Puma. Another difference between the two models is that Super Pumas has 2" more rocker at the bow & stern than the Puma, and it tapers a bit more radically at the ends too, giving it that "elves shoe" look.

These come in yellow, orange, lime, red, blue, and dark green. Purple and two-tone grey's are also available by special order but often take a month or more to get. Super Pumas weigh 96 pounds with two thwarts. An extra thwart adds about four pounds.

If you want top performance from your Super puma, you shouldn't overload it. AIRE gives 986 pounds as the load capacity for this model. This is not entirely unreasonable, but if you really have five guys that average 200 pounds per in the Super puma river raft, it does bog down a bit. On the other hand, with five guys that are more in the 170 pound range, it works quite nicely. So we suggest 850 for top performance. With even less, this thing really moves.

Are you a fly fisherman or fisherlady? If you want a firmer, pancake flat floor to stand on while fishing, consider cutting out half-circle shaped plywood pieces for the bow & stern of your boat. Sand them, route the edges, and brush the wood with about 12 coats (we're kidding, but you can never have too much) of varnish. On the last coat on the top surface, you can sprinkle clean sand or rock polisher grit on the varnish as it dries to improve traction. Hardware stores also sell an adhesive-backed sandpaper type material by the foot that you can stick down to the wood. We know many of you will end up buying an expensive fishing frame for this boat, and our way does not provide a lean bar, but using the simple wood decks does allow you to stick with a much smaller, cheaper, lighter oar frame - one designed for whitewater.

*The shopping cart will try to add UPS but we will correct the total before grabbing the funds.